News

KraussMaffei: no usual active participation in Fakuma 2020
0

KraussMaffei: no usual active participation in Fakuma 2020

7 July 2020
Due to the ongoing situation surrounding the new Corona virus (SARS-CoV-2) and its adverse effects on daily life and business, KraussMaffei does opt against the familiar and usual active participation in FAKUMA 2020 trade fair...
Kiefel after Covid-19: well prepared for the future
0

Kiefel after Covid-19: well prepared for the future

6 July 2020
Kiefel is expanding its medical business with additional product lines and technologies. The reassessment of the global basic medical care after the corona pandemic, as well as the mega-trend of an increasing and aging...
An high-growth business year for Keba
0

An high-growth business year for Keba

3 July 2020
The Linz-based KEBA Group saw revenue grow from €304 million to €373.5 million in the last fiscal year (April 2019 – March 2020). With a €70 million jump in sales and 23% growth in revenue, the KEBA Group has once...
Covestro wants to accelerate change to a circular economy
0

Covestro wants to accelerate change to a circular economy

7 June 2020
Covestro is fully committed to making the circular economy a model for a truly sustainable world. To this end, the materials manufacturer wants to completely align its entire production and product range as well as all areas in...
Equiplast 2020 is postponed until December
0

Equiplast 2020 is postponed until December

19 March 2020
Fira de Barcelona has decided to postpone Expoquimia, Eurosurfas and Equiplast, the three events of the chemical, surface treatment and plastics sectors, initially scheduled for 2nd to 5th June, until December. These three shows...
Tecnoplast International at K2019
0

Tecnoplast International at K2019

16 October 2019
Are you in Duesseldorf at k2019 ? Take your copy of Tecnoplast Magazine and TecnoplastInternational at press corner : entrance north 1st floor...
Ascend Performance Materials: a new portfolio of specialty polymers at K 2019
0

Ascend Performance Materials: a new portfolio of specialty polymers at K 2019

27 June 2019
Ascend Performance Materials announced growth plans – including new specialty polymers initiatives, capacity expansions and global developments – at a pre-K 2019 press conference in Antwerp, Belgium. Representatives of...
ENGEL is ready for K2019
0

ENGEL is ready for K2019

24 June 2019
Economic results In the recently concluded 2018/2019 fiscal year, ENGEL achieved group sales of EUR 1.6 billion, an increase of six percent over the previous year. “The German-speaking countries of Europe – Germany, Austria,...
The IMA Group wins its bet in the field of assembly machinery with Telerobot
0

The IMA Group wins its bet in the field of assembly machinery with Telerobot

10 June 2019
Following the acquisition of Telerobot S.p.A. in 2016, IMA not only significantly strengthened its presence in Automation, i.e. automatic assembly platforms, but also positioned itself as one of the most innovative world leaders...
Tecnoplast International at Plastpol – PHOTOGALLERY
0

Tecnoplast International at Plastpol – PHOTOGALLERY

4 June 2019
Tecnoplast International was in Plastpol with a special edition of the magazine, english and polish version. Look at our...
Tecnoplast at Plástico Brasil
0

Tecnoplast at Plástico Brasil

29 March 2019
This week we have visited Plastico Brasil at São Paulo Expo (São Paulo Exhibition & Covention Center) Exhibitors found a highly qualified public with a strong influence on the purchase decision while visitors will have...
Stefano Venturelli new TRIA CEO
0

Stefano Venturelli new TRIA CEO

20 March 2019
Stefano Venturelli to replace Luciano Anceschi as CEO of the group TRIA in a transition that has been planned for months in agreement with ownership. After opening the BoD to external members in 2016, the company further develops...
Arburg Technology Days 2019
0

Arburg Technology Days 2019

16 March 2019
Tecnoplast has partecipated at Arburg Technology Days in Lossburg (Germany). This year around 6,000 visitors from 53 countries registered with us. We met Managing Directors, they reported on how things currently stand with...
KraussMaffei strengthens management team
0

KraussMaffei strengthens management team

19 February 2019
The KraussMaffei Group has laid the foundations for future growth and is strengthening its management team with the newly created position of Chief Operating Officer (COO). Dr. Michael J. Ruf (54) will become a member of...
Interplastica 2019, look at our photogallery
0

Interplastica 2019, look at our photogallery

29 January 2019
A great event in Moscow for Tecnoplast Magazine at Interplastica 2019. We met a lot of italian companies. Look at our...
Fakuma 2018, look at our photogallery!
0

Fakuma 2018, look at our photogallery!

17 October 2018
...
Tecnoplast magazine at Fakuma 2018
0

Tecnoplast magazine at Fakuma 2018

15 October 2018
Solutions for the production of rugged, lightweight components are presented at the Fakuma international trade fair for plastics processing in Friedrichshafen from the 16th through the 20th of October, 2018. Tecnoplast magazine...
Extruders and Sheet Welders by Ritmo S.p.
0

Extruders and Sheet Welders by Ritmo S.p.

8 October 2018
Ritmo S.p.A presents Stargun K-SB the line of Extruders. K-SB 20 is the most compact model that uses Ø 3 and 4mm rod of PE, PP and PVDF. The maximal output is 2kg/h and it can be used for sheets up to 20mm thickness. The...
Netstal at Fakuma: ELIOS 4500 with highly precise and fast thin-wall application
0

Netstal at Fakuma: ELIOS 4500 with highly precise and fast thin-wall application

1 October 2018
Under the motto “Technology meets Digital,” the KraussMaffei Group will present trend-setting industry solutions at Fakuma (October 16–20, Hall A7, Stand 7303/7304). Netstal will showcase the ELIOS 4500, the model...
Sumitomo (SHI) Demag at Fakuma 2018
0

Sumitomo (SHI) Demag at Fakuma 2018

24 September 2018
At Fakuma 2018, Stand 1105, Hall B1, Sumitomo (SHI) Demag Plastics Machinery GmbH has chosen the motto of “Precision. Power. Productivity.” to showcase the company’s commitment to continuity and its high level of expertise...
WITTMANN at the Fakuma 2018
0

WITTMANN at the Fakuma 2018

18 September 2018
This year, the WITTMANN Group is again taking the opportunity to present its most recent product developments in a great variety of different areas at the Fakuma in Friedrichshafen. The company will showcase its latest...
Paolo Perazzi appointed General Manager of Macchi S.p.A.
0

Paolo Perazzi appointed General Manager of Macchi S.p.A.

4 September 2018
Starting from july 2018, the Board of Directors of Macchi S.p.A. has appointed Dr. Eng. Paolo Perazzi as General Manager of Macchi S.p.A. Paolo Perazzi takes over from Dr. Anthony M. Caprioli, to whom the Board of Directors has...
Doors open in Biesse for those who process technological materials
0

Doors open in Biesse for those who process technological materials

9 July 2018
Two days, the 28th and the 29th of June, during which Biesse open the doors of its Pesaro campus to meet with clients and exclusively demonstrate the technology it has developed for all companies that process technological...
Visit us at PLAST2018 and IpackIma2018
0

Visit us at PLAST2018 and IpackIma2018

25 May 2018
Tecnoedizioni Group will attend Plast and Ipack-Ima, please visit our booths and take your copy of our magazine! You can find us at Ipack-Ima – Hall. 5 D09 – with our magazine Tecnofood And at Plast 2018 – Hall...
NPE 2018 our photogallery from Orlando (Florida)
0

NPE 2018 our photogallery from Orlando (Florida)

10 May 2018
We are in Orlando (Florida), attending NPE 2018. HERE you can find the digital version of TECNOPLAST INTERNATIONAL, SPECIAL EDITION NPE 2018 Here is our...
Chinaplas 2018 : our photogallery
0

Chinaplas 2018 : our photogallery

22 April 2018
Visiting the fair: Our second media day in Shangai at CHINAPLAS 2018 Our first media day in Shangai at CHINAPLAS...
Coperion and Coperion K-Tron:total technology solutions for plastics processing at Chinaplas 2018
0

Coperion and Coperion K-Tron:total technology solutions for plastics processing at Chinaplas 2018

21 April 2018
Coperion GmbH, Stuttgart, Germany, presents itself as a total technology solution provider for all plastics processing applications. In addition to a new compounding line concept especially developed for the Chinese market...
Co-rotating twin-screw extruders by Maris
0

Co-rotating twin-screw extruders by Maris

6 April 2018
The Italian company MARIS S.p.A., is one of the few leading manufacturer of co-rotating twin-screw extruders in the world, still producing in-house their extrusion lines. The screws are self-cleaning modular elements, suitable...
Caps and total quality control, Sacmi to showcase the full range at Chinaplas 2018
0

Caps and total quality control, Sacmi to showcase the full range at Chinaplas 2018

17 March 2018
Caps and total quality control, Sacmi to showcase the full range at Chinaplas 2018. The country’s main plastic-rubber industry event will see the Group attend with the successful compression press range, now enhanced with...
Chinaplas 2018 to launch Young Tech Hall
0

Chinaplas 2018 to launch Young Tech Hall

8 January 2018
In line with unprecedented rapid development of technology, CHINAPLAS, after 31 editions of advancement, is evolving, in response to the needs of the industries, from a business platform for materials and equipment purchasing to...
Vibatan: masterbatches for WPC & fragrances
0

Vibatan: masterbatches for WPC & fragrances

15 November 2017
We often hear about WPC (Wood Plastic Composite), composite material made of thermoplastics and wood, for which it is possible to use different kinds of wood flour in addition to virgin or recycled plastics. When mixed together,...
Extruders and Sheet Welders: Ritmo News
0

Extruders and Sheet Welders: Ritmo News

15 November 2017
Ritmo S.p.A has presented two new Extruders at Fakuma 2017. This product is the technological development of the previous models, where improvements have been made on the entire machine: engine, electronics, use of new materials,...
Technical Plast:  manufacturing of plastics and moulds
0

Technical Plast: manufacturing of plastics and moulds

14 November 2017
Technical Plast has been operating since 1977 in the manufacturing of plastics and of moulds, and in the moulding of engineering plastics with high technological content in order to develop products of high technical performance...
Granulators and pelletizers by Filtec
0

Granulators and pelletizers by Filtec

8 November 2017
At the eve of our 25 years of experience, Filtec go on to increase their development and take care of the presence of the foreign markets too. To be more and more present and to give an efficient service Filtec is supported by...
Mepol Group: the proposal is expanding and the website is renewed
0

Mepol Group: the proposal is expanding and the website is renewed

7 November 2017
A common goal, shared among many people, is the vital lymph for Mepol Group, which nowadays consists of 4 companies: Mepol, holding, I.T.I. Poland the Polish “sister”, I.T.I. Polymers trader and distributer and Polar,...
Fakuma 2017: our photogallery
0

Fakuma 2017: our photogallery

6 November 2017
Tecnoedizioni Group has partecipated at last edition of Fakuma, look at our pictures of the fair!...
Friends of Tecnoplast at #K2016
0

Friends of Tecnoplast at #K2016

25 October 2016
Friends of #tecnoplast @K_tradefair 2016 Mr Uccheddu and Ms G Franceschetti by #francescofranceschetti #elastomeri pic.twitter.com/8qSkN7lXp8 — Tecnoedizioni (@tecnoedizioni1) October 24, 2016 Friends of...

I cookie ci aiutano a fornire i nostri servizi. Utilizzando tali servizi, accetti l'utilizzo dei cookie da parte di TecnoPlast maggiori informazioni

TecnoPlast utilizza i cookie per fonire la migliore esperienza di navigazione possibile. Continuando a utilizzare questo sito senza modificare le impostazioni dei cookie o premendo su "Accetta" permetti il loro utilizzo.

Chiudi