News

United Caps announces new products
0

United Caps announces new products

15 March 2021
United Caps, an international manufacturer of caps and closures, reported that, despite the challenges of the pandemic, the company continues to harvest from its rich product pipeline, developing and launching new products that...
Covestro using CO2 for plastics production
0

Covestro using CO2 for plastics production

15 March 2021
Carbon dioxide instead of petroleum as a component in plastics – Covestro is pursuing new avenues for turning the waste gas into a useful raw material, expand the resource base of the chemicals industry and promote the circular...
Innovative automatic dosing system for the plastic industry
0

Innovative automatic dosing system for the plastic industry

15 March 2021
Color Service has built an innovative and reliable system applied to the Plastic Industry that guarantees 24/7 Repeatability, Traceability and High Accuracy of the dosing process of any pigment and additive. The revolutionary...
Sepro launches packaged robot solutions for medical and pharmaceutical applications
0

Sepro launches packaged robot solutions for medical and pharmaceutical applications

12 March 2021
To meet growing demand for automation in clean rooms and other sensitive environments in medical and pharmaceutical molding plants, Sepro Group is introducing the MED Series of 3-, 5- and 6-axis robots. These packaged units come...
IMS: tool holders for numerical controlled machines
0

IMS: tool holders for numerical controlled machines

15 February 2021
The interview with Alberto Aprà, CEO of IMS Since 1969, IMS has been manufacturing tool holder cones for CNC machines, including those for milling machines and routers used in the plastics industry. At the headquarters in...
Moretto’s 40 years celebration book
0

Moretto’s 40 years celebration book

8 February 2021
It was January 14th, 1980 when Renato Moretto went to the Padua Chamber of Commerce to register the company “Lavorazioni Lamiere di Moretto Renato”. “It was done and I felt the full responsibility of my actions ”....
Bioplastics meet all EU safety standards
0

Bioplastics meet all EU safety standards

23 November 2020
Products made from bio-based plastics must undergo the same testing procedures as conventional plastic products to access the market of the European Union (EU). Thereby a health risk for consumers is excluded. Plastics intended...
Report: plastic’s utility for bottling and packaging
0

Report: plastic’s utility for bottling and packaging

20 October 2020
A new report released by the Plastics Industry Association (PLASTICS) explains why plastics, notably Polyethylene Terephthalate (PET), High-Density Polyethylene (HDPE), and Poly Propylene (PP), have become the leading material...
Plastic Fairs, the updated calendar 2020
0

Plastic Fairs, the updated calendar 2020

1 April 2020
Chinaplas 3-6 August 2020 Shangai – China First introduced in 1983, CHINAPLAS has been approved by UFI (The Global Association of the Exhibition Industry) since 2006. CHINAPLAS is exclusively sponsored by the Europe’s...
Miozzo: long radius pipe bends
0

Miozzo: long radius pipe bends

11 October 2019
The company Miozzo Srl has been producing components for the pneumatic conveying systems for over 40 years and it is supplier of accessories for the best Italian brands. Miozzo Srl stands out in Italy in the supply of bends for...
Paolo Perazzi appointed General Manager of Macchi S.p.A.
0

Paolo Perazzi appointed General Manager of Macchi S.p.A.

4 September 2018
Starting from july 2018, the Board of Directors of Macchi S.p.A. has appointed Dr. Eng. Paolo Perazzi as General Manager of Macchi S.p.A. Paolo Perazzi takes over from Dr. Anthony M. Caprioli, to whom the Board of Directors has...
Chinaplas 2018 to launch Young Tech Hall
0

Chinaplas 2018 to launch Young Tech Hall

8 January 2018
In line with unprecedented rapid development of technology, CHINAPLAS, after 31 editions of advancement, is evolving, in response to the needs of the industries, from a business platform for materials and equipment purchasing to...
Extruders and Sheet Welders: Ritmo News
0

Extruders and Sheet Welders: Ritmo News

15 November 2017
Ritmo S.p.A has presented two new Extruders at Fakuma 2017. This product is the technological development of the previous models, where improvements have been made on the entire machine: engine, electronics, use of new materials,...
Granulators and pelletizers by Filtec
0

Granulators and pelletizers by Filtec

8 November 2017
At the eve of our 25 years of experience, Filtec go on to increase their development and take care of the presence of the foreign markets too. To be more and more present and to give an efficient service Filtec is supported by...
Mepol Group: the proposal is expanding and the website is renewed
0

Mepol Group: the proposal is expanding and the website is renewed

7 November 2017
A common goal, shared among many people, is the vital lymph for Mepol Group, which nowadays consists of 4 companies: Mepol, holding, I.T.I. Poland the Polish “sister”, I.T.I. Polymers trader and distributer and Polar,...
Fakuma 2017: our photogallery
0

Fakuma 2017: our photogallery

6 November 2017
Tecnoedizioni Group has partecipated at last edition of Fakuma, look at our pictures of the fair!...
Tecnova: a force that lasts since over thirty years
0

Tecnova: a force that lasts since over thirty years

3 October 2017
Tecnova is always at the forefront in recycling equipment for all polymeric materials, with the realization of extrusion lines suitable for all needs of the industry, from laboratory systems up to lines of 2 ton/hour capacity...
battenfeld-cincinnati: next-generation extrusion machinery at Equiplast
0

battenfeld-cincinnati: next-generation extrusion machinery at Equiplast

21 September 2017
The battenfeld-cincinnati team will showcase technologically advanced extrusion developments at Equiplast at the booth of long-time partner and agent for Spain Comercial Douma (hall 3, D 474). “For battenfeld-cincinnati, Spain...
Plas Mec celebrates its fiftieth anniversary
0

Plas Mec celebrates its fiftieth anniversary

6 September 2017
The interview with Massimo Grigolon, Managing Director of Plas Mec, a company specialised in mixing systems for...
Haitian’s half-year result for 2017: record sales again and increasing demand for Technology to the Point
0

Haitian’s half-year result for 2017: record sales again and increasing demand for Technology to the Point

31 August 2017
Haitian, one of the biggest manufacturers of plastics injection molding machines in the world, announces its interim...

I cookie ci aiutano a fornire i nostri servizi. Utilizzando tali servizi, accetti l'utilizzo dei cookie da parte di TecnoPlast maggiori informazioni

TecnoPlast utilizza i cookie per fonire la migliore esperienza di navigazione possibile. Continuando a utilizzare questo sito senza modificare le impostazioni dei cookie o premendo su "Accetta" permetti il loro utilizzo.

Chiudi